How To Program A Terk Remote

TERK TKRTBL04BV - 4-Device Remote - Brushed Black - Use Transmission - Use Guide PDF.
Documents: Go to donwload!
User Manual

• User Manual - (English language, Castilian)

Other Documents

• Quick Start Guide - (English language)

Table of contents

• Step 1: Install the batteries
• Step two: Program your remote
• Tour of the Remote
• Advanced Functions
• Troubleshooting

User Manual

Step i: Install the batteries

Your universal remote requires two CR2032 coin-prison cell batteries (included).

To install the batteries:

1. Remove the battery compartment comprehend.

2. Place the batteries in the compartment with their (+) markings up. Push each battery up under the ridge in the compartment with the "+" mark.

3. Push the bombardment cover back into identify

Bombardment Saver

Your universal remote control saves battery ability by automatically turning off if any cardinal is pressed for more than seconds. This saves your battery life should your remote become stuck in a place where the keys remain depressed, such equally between sofa cushions.

Stride 2: Program your remote

To use this universal remote with your home amusement system, first you need to programme information technology to command your devices. There are iv ways y'all tin can program the universal remote to operate your devices. Try them in the order listed.

• The Direct Code Entry lets you enter a code from the accompanying lawmaking list for your make of device.
• The Make Code Search searches through the codes for select brands of devices.
• The Auto Code Search goes automatically through all the codes for the device yous're trying to control.
• The Manual Code Search lets you manually go through all the codes for the device you lot're trying to control.

Direct Code Entry

Direct Code Entry lets you enter a code from the accompanying code list for your brand of device.

TIP: Each device fundamental is associated with a type of device— the TV is preset to search for TVs, SATELLITE Cablevision for satellite receivers or cable boxes, STREAM for streaming players, and DVD B RAY for DVD and Blu Ray players. To program a device key for a different type of device, run across the Changing a Key'due south Device Type section.

1. Manually plow on the device you want to command.

2. Detect the Code List that came with the remote. Locate the section for the type of device yous're trying to program, and find your brand in that section. Circle the codes for your brand and keep them handy.

3. Press and hold the device key you desire to program (the POWER key illuminates).

While yous're belongings downwards the device key, use your other hand enter the first v-digit lawmaking for your brand in the code list (the POWER cardinal turns off after the first digit)

4. When yous've finished entering the five-digit lawmaking, keep holding downwardly the device cardinal and look at the Ability key.

Is the POWER key illuminated?

YES: Yous're done! You've programmed this device key.

NO, it blinked four times and turned off: You take either entered a code number that is not in the code lists or missed a step in the code entry process. Try step 3 again

NOTES

Examination the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don't piece of work, effort a different code in the listing.

Remember to enter the code for future reference in the box provided in the Lawmaking Retrieval section of this transmission.

If your make isn't listed in the code list, utilise ane of the Code Search methods to programme the remote command. (Refer to the Automobile and Manual Code Search methods.)

If you release the device fundamental whatever time during the Direct Code Entry procedure, the Ability fundamental blinks four times, and the procedure is exited. The concluding programmed code under the device fundamental is retained.

Make Code Search

The Make Code Search goes through only the codes for ane of the select brands listed in the accompanying code list. If your brand of device is listed, this search can be very quick and easy.

TIPS: Each device primal is associated with a blazon of device— the TV is preset to search for TVs, SATELLITE CABLE for satellite receivers or cable boxes, STREAM for streaming players, and DVD B RAY for DVD and Blu Ray players. To program a device key for a different type of device, see the Changing a Key'south Device Type section.

To leave without saving a new code at whatsoever betoken in the Brand Code Search, press the EXIT central

i. Manually turn on the device you want to control.

2. Detect your device'southward brand in the Make Code list department of the accompanying lawmaking list. Circle the number for your brand and keep the list handy.

three. Press and concord the device cardinal y'all desire to program. The Ability fundamental illuminates.

While you're holding downward the device primal, use your other paw to press and hold the remote's POWER central at the same fourth dimension. The POWER key turns off.

four. Wait until the POWER key comes on and stays on. So release both keys.

5. Wait at the numbers yous circled for your device'due south brand code number. Press those numbers on the remote keypad.

6. Indicate the remote straight at the front panel of the device you want to control. Printing Power on the remote and await ii seconds. The remote is testing a single code for your device'due south brand.

Did your device turn off?

YES: Printing the key to store the lawmaking. You lot're washed! Yous've programmed this device key.

NO: Press POWER over again. The remote tests the adjacent lawmaking for your brand.

Go along pressing POWER every 2 seconds until your device turns off. When it does, press .

NOTES

Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the device yous are currently programming the remote to control.

Test the remote with the device to make certain the device fundamental is programmed with the correct code for maximum functionality. If some features don't work, try a different code. See the "Testing the Lawmaking for Maximum Functionality" section below for more information.

During the Brand Code Search, the remote ignores keypresses that aren't part of the search.

The search times out later on two minutes (the Ability primal blinks four times and turns off, and the last programmed lawmaking under that device central is retained).

The POWER central blinks 4 times and turns off when the remote has gone through all the codes. The remote exits the Make Lawmaking Search. If your device hasn't turned off yet, try a different search method.

Testing the Code for Maximum Functionality

1. Effort a variety of the device's functions with the remote. If some device features don't work, become to the next step to try a unlike code.

2. Repeat the Brand Lawmaking Search from the start. When the device turns off for the first time, don't press the key, which would store the same code. Instead, with the unit now off, continue to press the POWER key repeatedly until the unit turns back on.

3. Once the unit of measurement turns back on, you have found some other lawmaking that operates the device. Printing the key.

4. Test the cardinal's functionality again by attempting to control a diversity of the device's functions. If the lawmaking that has been stored controls the bulk of the device'southward functions, programming is complete. If the code stored does non give maximum functionality, try another lawmaking.

Auto Code Search

The Auto Code Search goes automatically through all the codes for the device y'all're trying to control. When you discover the one that operates your device, you can stop the search and shop that code.

TIPS: Each device fundamental is associated with a type of device— the Tv is preset to search for TVs, SATELLITE CABLE for satellite receivers or cable boxes, STREAM for streaming players, and DVD B RAY for DVD and Blu Ray players. To program a device primal for a different type of device, see the Irresolute a Key's Device Blazon section.

To leave without saving a new code at any indicate in the Machine Code Search, printing the EXIT central.

ane. Manually turn on the device you want to command.

2. Press and hold the device cardinal you want to program. The Power key illuminates.

While you're holding down the device key, utilise your other paw to printing and hold the remote's POWER fundamental at the aforementioned fourth dimension. The Ability fundamental turns off.

iii. Wait until the Power key comes on and stays on. And then release both keys.

4. Point the remote directly at the front end console of the device you desire to control. Press on the remote and await v seconds. The remote is testing a batch of x codes on your device.

Did your device plow off?

YES: Go to step 5.

NO: Press once more. The remote tests the next batch of codes.

Go on pressing every 5 seconds until your device turns off.

5. When your device turns off, press the cardinal on the remote and wait at least ii seconds. The remote tries the final of the previous ten codes.

Did your device turn on?

YES: Press the key. Y'all're done! Yous've programmed this device fundamental.

NO: Printing once again. The remote tests the adjacent code in the batch.

Go on pressing every two seconds until your device turns back on. When it does, press .

Annotation: If you accidentally press the key later on your device turns on, press the key. Then, wait ii seconds to see if your device turns off once again.

NOTES

Throughout the programming of each cardinal, be sure to continue the remote pointed at the IR sensor of the device you are currently programming the remote to control.

Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don't work, try a different code. See the "Testing the Lawmaking for Maximum Functionality" section beneath for more information.

During the Auto Code Search, the remote ignores keypresses that aren't part of the search.

The search times out afterwards 2 minutes (the POWER key blinks four times and turns off, and the last programmed code under that device fundamental is retained).

The Power key blinks four times and turns off when the remote has gone through all the codes. The remote exits the Machine Code Search. If your device hasn't turned off yet, try a different search method

Testing the Code for Maximum Functionality

1. Try a variety of the device's functions with the remote. If some device features don't work, go to the next stride to try a dissimilar lawmaking.

2. Repeat the Auto Code Search Method from the beginning. When your device turns off, do not cease searching. Instead, with the unit now off, proceed to press thekey every 5 seconds until the unit turns back on.

3. One time the unit of measurement turns back on, press the key on the remote every 2 seconds until your device turns off again. When your device turns off again, press the key.

4. Exam the key'southward functionality again by attempting to command a variety of the device's functions. If the code that has been stored controls the majority of the device's functions, programming is complete. If the lawmaking stored does not give maximum functionality, try another lawmaking

Manual Code Search

The Manual Code Search lets you become 1-by-1 through all the codes for the device you're trying to control. When you find the one that operates your device, y'all tin stop the search and store that code.

TIPS: The Manual Lawmaking Search method may take a long time considering the remote searches through all of the codes in its memory one-by-1. If your brand is listed in the Brand Codes or the Code Lists, first try the Brand Code Search or the Straight Lawmaking Entry method.

Each device key is associated with a type of device—the Tv set is preset to search for TVs, SATELLITE Cablevision for satellite receivers or cablevision boxes, STREAM for streaming players, and DVD B RAY for DVD and Blu Ray players. To program a device cardinal for a different type of device, come across the Changing a Key's Device Type section.

To exit without saving a new code at any point in the Transmission Code Search, printing the EXIT central.

one. Manually turn on the device you lot want to control

2. Press and hold the device central y'all desire to plan. The POWER key illuminates

While you're belongings down the device fundamental, apply your other hand to press and hold the remote'south Power key at the same time. The Ability key turns off.

iii. Wait until the remote'south Ability cardinal comes on and stays on. Then release both keys.

iv. Bespeak the remote directly at the front panel of the device you desire to control. Press Power on the remote and wait 2 seconds. The remote is testing a single code for your device.

Did your device turn off?

YES: Press the fundamental to shop the code. You're washed! You've programmed this device key.

NO: Printing Power again. The remote tests the adjacent lawmaking for your device.

Continue pressing Ability every 2 seconds until your device turns off. When it does, press .

TIP: Because there are so many codes, yous may have to printing the POWER key many times—possibly hundreds of times.

NOTES

Throughout the programming of each central, continue the remote pointed at the IR sensor of the device you are programming the remote to control.

Test the remote with the device to brand sure the device fundamental is programmed with the correct code for maximum functionality. If some features don't piece of work, endeavour a different code. See the "Testing the Code for Maximum Functionality" section beneath for more data.

During the Manual Code Search, the remote ignores keypresses that aren't function of the search. The search times out afterwards two minutes (the Ability key blinks 4 times and turns off, and the terminal programmed lawmaking under that device fundamental is retained).

The POWER key blinks four times and turns off when the remote has gone through all the codes. The remote exits the Brand Code Search. If your device hasn't turned off yet, effort a dissimilar search method.

Testing the Code for Maximum Functionality

1. Try a variety of the device's functions with the remote. If some features of your devices don't piece of work, get to the next pace to try a unlike lawmaking.

two. Repeat the Manual Code Search and Entry Method from the beginning. When the device turns off for the start time, don't printing the cardinal, which would store the aforementioned lawmaking. Instead, with the unit of measurement now off, proceed to press the POWER key repeatedly until the unit turns back on.

iii. Once the unit turns dorsum on, you take institute another code that operates the device. Press the primal.

4. Exam the key's functionality again past trying a variety of functions. If the code controls the majority of the device'southward functions, programming is consummate. If the code stored does not requite maximum functionality, try some other code

Tour of the Remote

In near cases, the keys on this remote perform the same functions as the keys on your original remotes once you lot've programmed this remote to operate your components. Many keys on this remote take other functions as well.

Illuminated POWER key serves every bit an indicator light to provide feedback.

Device keys (Television set, SATELLITE Cablevision, STREAM, DVD B RAY) put the remote in the right way to control your device.

MENU and INFO•OPTIONS access device carte du jour and information screens.

Get out exits remote programming; it also performs the same functions equally on your original remotes.

GUIDE•Habitation puts the remote in guide fashion for satellite receivers or cable boxes, and accesses the home screen for streaming players.

Pointer keys and OK human activity as navigation and pick keys in device guides and menu systems.

The INPUT — (dash) cardinal has three functions: (1) it toggles through all the video sources connected to your Television receiver; (2) when the remote is in VCR style, this button toggles between VCR and the TV input; (iii) when y'all're entering digital channel numbers directly, this button lets you separate the main aqueduct number from the sub-aqueduct number (such as 59.1).

Backlight key ( ) turns backlighting on/off

IMPORTANT

Because this remote controls more than i device, you lot must first "tell" the remote which device you wish to operate. That ways, if you wish to operate your Television, y'all must first printing the Television set key to put the remote in the TV Mode. The remote stays in that device mode until you press a dissimilar device fundamental. For instance, if your remote is in Tv set Fashion and yous desire to operate the DVD role player, you must printing the DVD B RAY primal to change device modes.

Advanced Functions

Irresolute A Fundamental's Device Type

Each device primal is associated with a type of device—the TV is preset to search for TVs, STREAM for streaming players, SATELLITE CABLE for satellite receivers or cable boxes, and DVD B RAY for DVD or Blu Ray players. To program these keys to control a different kind of device, you lot accept to reassign them first.

Reassigning the DVD B RAY Key to Control a VCR

The DVD B RAY central defaults to command a DVD player. If y'all want the DVD B RAY key to command a VCR, you must reassign it.

1. Printing and hold the DVD B RAY central. The Power primal illuminates. Keep property downwardly the DVD B RAY key.

2. While belongings down the DVD B RAY central, press and release the number 2 key on the keypad. The Power central turns off.

3. Release the DVD B RAY key. The POWER central blinks ii times and so turns off. The DVD B RAY key is at present prepare to command a VCR.

4. Follow the directions in the auto, brand, direct entry, or manual code search to program the DVD B RAY key for your VCR.

Aqueduct Lock

Channel lock automatically sends channel commands, like the CH, Go BACK, and 0–9 number keys, to your satellite receiver, cable box, or digital TV converter when you're in TV mode. This can relieve you lot keypresses if you apply a device other than your TV to change channels.

To turn aqueduct lock on:

ane. Printing and hold the device primal for the device you apply to change channels. While you lot're holding down this device key, use your other hand to printing and hold the remote's CH up key at the same fourth dimension.

2. Look until the remote's POWER key comes on and stays on. So release both keys.

iii. Printing ENTER to lock channel commands to this device.

To turn channel lock off:

ane. Printing and hold the Television key. While you're belongings downwardly the TV cardinal, use your other paw to press and concord the remote's CH down key at the same time.

two. Wait until the remote's POWER key comes on and stays on. Then release both keys.

3. Press ENTER to start changing channels with your TV.

Code Retrieval

In one case yous've programmed the remote to command your devices, you may want to record the codes for future reference. If you lot used the Direct Code Entry method, this is easy. Just find the codes y'all entered and make a annotation of them in the boxes below. If you used one of the Lawmaking Search methods to program your remote or if you used the Direct Entry method but don't think the lawmaking, you will need to call up each device's v-digit lawmaking. Retrieving the actual code and writing it down volition salvage you fourth dimension if you ever need to program the remote again. If the codes are recorded, you tin can utilize the Directly Entry method to reprogram your remote to control your devices, which is quick and like shooting fish in a barrel.

1. Printing and agree the device primal (TV, SATELLITE CABLE, STREAM, DVD B RAY) whose code you lot wish to think. The Ability key illuminates. Keep pressing the device key.

ii. While holding the device key downwards, press and hold the INFO•OPTIONS central. The Power primal turns off. After holding downward both keys for three seconds, the Power key turns back on.

three. Release both keys. The POWER key remains on.

4. Starting with the number ane central, printing and release each number cardinal on the keypad in the following society: i-nine, then 0. The number that causes the POWER fundamental to blink is the first number of the code. As you notice each number of the code, write it down for hereafter reference.

Note: All TV codes begin with the number 1; all VCR and DVR codes begin with the number two; all DVDs, the number three; all sound devices, the number 4; and all satellite receivers, cablevision boxes, streaming players and DTV converters, the number 5.

5. Repeat step 4 until y'all have retrieved all v numbers in the code. After the 5th number is retrieved, the POWER primal blinks briefly, then turns off.

TIP: To go out the Lawmaking Retrieval Style at any time, press the EXIT fundamental.

Note: If you lot press an invalid fundamental during the Code Retrieval procedure, the remote will not answer. If y'all practise not press a valid Code Retrieval cardinal (Boob tube, SATELLITE Cable, STREAM, DVD B RAY, INFO•OPTIONS, EXIT), Code Retrieval times out after xv seconds. The POWER fundamental blinks four times, and then turns off

Troubleshooting

Problem: The remote does not operate your device.

• Make sure the remote is in the correct way by pressing the respective device key (Television set, SATELLITE Cable, STREAM, DVD B RAY). This tells the remote which device to operate.
• Remove any obstacles betwixt the remote and the device. Make sure you're aiming the remote at the device's IR sensor.
• Make certain the batteries are fresh and are properly installed. Supersede the batteries with ii new CR2032 batteries, if necessary (see the Battery Installation section).

Problem: The remote tin can't be programmed to operate your device.

• If you are testing the remote while programming it, you may be likewise far away from the device or at a wrong bending. There must exist an unobstructed path betwixt the remote and the IR sensor on the device. Move closer and make sure you point the remote at the device you're trying to command.
• If you're using the Direct Entry programming method to enter the codes for your brand and the unit is still not functioning properly, try the motorcar, brand, or manual search method.
• To command philharmonic units, similar Tv/VCRs or TV/DVDs, yous must plan the individual respective device keys to command each function of the combo unit. In one case programmed successfully, the Goggle box cardinal controls the TV functions, and the DVD B RAY key controls the VCR or DVD functions.
• Make sure the batteries are fresh and are properly installed.

Trouble: The remote doesn't perform commands properly.

• Make sure the remote is in the correct mode past pressing the corresponding device key (TV, SATELLITE Cable, STREAM, DVD B RAY). This tells the remote which device to operate.
• Make sure device is ready (for example, the DVD role player has a disc loaded).
• Yous may have pressed an invalid key for the fashion the remote is in.
• If y'all're trying to enter a aqueduct number direct, endeavor pressing the ENTER key after inbound the channel number as this is a requirement of certain models and brands.
• There is a possibility that a programmed code may just be able to control some of your device features for instance, only turns a device on and off). To confirm that the device fundamental is programmed with the correct code for maximum functionality, test the device. Attempt to control a variety of the device's functions with the remote. If some of the features of your devices don't work, try programming the remote with a dissimilar lawmaking in the list using the Direct Code Entry Method, until you notice the code that allows the remote to control the majority of your device'southward functions. Different codes can provide different levels of functionality.

Problem: The Power cardinal does not lite when you press a primal.

• Y'all may accept pressed an invalid cardinal for the fashion the remote is in.
• Make sure the remote is in the correct mode by pressing the respective device key (Goggle box, SATELLITE Cablevision, STREAM, DVD B RAY). This tells the remote which device to operate.
• Make certain the batteries are fresh and are properly installed. Supervene upon the batteries with ii new CR2032 batteries, if necessary (see the Bombardment Installation section).

Problem: Remote backlighting doesn't work.

Trouble: The remote volition not alter channels on device.

• Make certain the remote is in the right manner by pressing the corresponding device primal (TV, SATELLITE CABLE, STREAM, DVD B RAY). This tells the remote which device to operate.
• Press the ENTER key afterwards y'all enter a aqueduct number.
• Remove whatever obstacles between the remote and the device. Make sure to aim the remote at the IR sensor on the device.

Problem: The device's menu does not appear on the TV screen.

• Make sure you have connected the device to your TV properly and selected the correct input. (Run across your devices' Owner'south Manuals for proper connexion procedures.)
• Brand sure the remote is in the correct mode by pressing the respective device cardinal (TV, SATELLITE CABLE, STREAM, DVD B RAY). This tells the remote which device to operate.
• Carte du jour access isn't supported for all brands. You may demand to use your original remote control to admission menu functions for some devices.

Also, These documents are for others TERK models: TKRTBL04B

Tags: TERK Remote Controls User Manuals, Terk Remote, Terk Idiot box Remote Control Transmission, Terk Codes, Terk Universal Remote, Terk iv Remote, Terk 6 Device Remote Transmission

Source: https://manualsfile.com/product/9f6cxga2k.html

Share this post